Our state of the art iron phosphate pretreatment system ensures excellent adhesion and corrosion resistance for coated parts.

We have a reverse osmosis system that serves as both a halo and rinse tank replenishment, enhancing the quality of the pretreatment process.

For efficient drying, we utilize a 10-minute dry-off oven, which prepares the parts for the coating process.

Our 20-minute cure oven, operating at a speed of 6 ft per minute, provides optimal curing conditions to achieve a durable and long-lasting finish.

At Shoreline we employ Eurotech reclaim technology, which allows us to efficiently recover and reuse excess powder, minimizing waste and maximizing cost-effectiveness.

Using (2) Gema guns, we ensure precise and uniform powder application on your parts.

Our experienced operators carefully control the coating process to achieve the desired finish.

After curing, the coated parts pass through our 8-minute cooling tunnel, which promotes rapid cooling and solidification of the powder coating.

Our conveyor system utilizes a Unibilt enclosed track, providing smooth and reliable transportation of your parts throughout the coating process.

We typically operate at a speed of 6.5ft per minute, resulting in a cycle time of approximately 100 minutes.

Our operating window allows parts with dimensions of up to 30” wide, 48” tall, and 96” long.

Longer parts need to be skinnier and shorter to accommodate the conveyor configuration.

However, we can handle parts up to nearly 100” in length if they are less than 10” wide.

In addition to our main production line, Shoreline offers an offline Mini-booth equipped with a third Gema gun.

The mini-booth is dedicated to sample parts or very small runs, allowing for quicker color changes.

To maintain quality control and prevent contamination, we keep a small gap in the production line when using the mini-booth.